| Working voltage | da 11V a 14V |
|---|---|
| Maximum current consumtion | 18A |
| Safety fuse | 20A |
| Frequency range | 28-30MHz |
| Band | 10 metri |
| Maximum Gain | 15db |
| Maximum input power | 5W |
| Maximum output power | 120W |
Clic to download
Related products
MLA100 is a compact 100W amplifier, with MOSFET Mitsubishi RD1100HHF1, for HF and 6mt bands from 1.8MHz to 54MHz. The amplifier features an extremely fast RX and TX switching with PIN diodes which makes it suitable for use in QSK. The driving power must be between 1 and 5W. With the PTT the device will work best, without working in VOX mode. The output filter is chosen automatically by the amplifier, but can be preselected manually by the user. On the front panel, in addition to the band in use, output power and VSWR are graphically indicated. The apparatus also has a series of automatic protections such as: over-temperature, over-pilot, excessive VSWR, overcurrent etc …
Instant use without setup • over 1000 Watts Key-down Output • Instant Bandswitching, no tuning, no warm-up, SWR protected, • Quiet Variable-Speed Cooling System • RMS Forward/Reflected Power Metering ALC Metering • LCD Display • Front Panel Band and Error LEDs • Manual or Automatic band selection • 2 antenna outputs assigned from menu to the selected band • Using two matched MRF 157 • Operates from 50 Volts for efficient, • low distortion and linear RF power service • A large heat-sink permits a long QSO times at max power
Reviews
There are no reviews yet.