Filter
The BLA703 is a new Base station AC powered 500W amplifier for the frequency range 25-30MHz. It features a Switched mode Power Suppy that is both lightweight and very efficient and can be powered from 100 to 240VAC. The BLA703 will be available in both Export and FCC versions, (Band Limited 28.000MHz to 29.700MHz).
Input power is from 1W to maximum 35W for a maximum output of 500W.
The BLA703 features protection for Excessive input drive, Excessive antenna VSWR, Excessive temperature and for out of band transmissions.
The BLA703 features both high efficiency a large heatsink with two large cooling fans for quiet and reliable operation.
AD 203 is a PCB Board which is installed in suitable radio transceivers to increase their power.
Check the information in the user manual for suitability.
The KL 35 is a 12V linear amplifier for use in the frequency range 28 – 29.7 MHz, with a drive power of 1 to 5 W.
The KL 60 is a 12V linear amplifier for use in the frequency range 28 – 29.7 MHz, with a drive power of 1 to 5W in FM/AM mode, and 2.0 – 10W in SSB mode.
The KL 200 is a 12V linear amplifier for use in the frequency range 28 – 29.7 MHz, with a drive power of 1 to 5W in FM/AM mode, and 2.0 – 10W in SSB mode.
The KL 200 P is a 12V linear amplifier for use in the frequency range 28 – 29.7 MHz, with a drive power of 1 to 5W in FM/AM mode, and 2.0 – 10W in SSB mode. The KL 200 P also features a 25dB RX preamplifier with electronic switching, which can be switched in or out via a front panel switch.
KL 203 is a 12V linear amplifier for use in the frequency range 28 – 29.7 MHz frequency, with a drive power from 1 to 10W in AM-FM-SSB mode.
The KL 203 P is a 12V linear amplifier for use in the frequency range 28 – 29.7 MHz, with a drive power from 1 to 10W in AM-FM-SSB modes. The KL 203 P also features a 26dB RX preamplifier with electronic switching, which can be activated via a switch on the front panel.
The KL 503 is a 12V linear amplifier for use in the frequency range 25 – 30 MHz, with a drive power of 1 to 6 W in all modes. The KL 503 features a six-position power selector via a a front panel knob and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.
The KL 503 HD is a 12V linear amplifier for use in the frequency range 25 – 30 MHz, with a drive power of 1 to 35 W in all modes. The KL 503 HD features a six-position power selector via a a front panel knob and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.
The KL 703 is a 12V linear amplifier for use in the 25 – 30 MHz frequency range, with a drive power of 1 to 35 W in all modes. The KL 703 has a three-position output power selector via a switch on the front panel, two heatsink cooling fans and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.
The KL 805 is a 24V linear amplifier for use in the frequency range 25 – 30 MHz, with a drive power of 1 to 15 W in all modes. The KL 805 has a RX preamplifier with electronic switching, a three-position power selector via a switch on the front, a connector for remote control, and three cooling fans. On the front there is also a LED wattmeter to indicate the output power.
Showing all 12 results