BLA 703
The BLA703 is a new Base station AC powered 500W amplifier for the frequency range 25-30MHz. It features a Switched mode Power Suppy that is both lightweight and very efficient and can be powered from 100 to 240VAC. The BLA703 will be available in both Export and FCC versions, (Band Limited 28.000MHz to 29.700MHz).
Input power is from 1W to maximum 35W for a maximum output of 500W.
The BLA703 features protection for Excessive input drive, Excessive antenna VSWR, Excessive temperature and for out of band transmissions.
The BLA703 features both high efficiency a large heatsink with two large cooling fans for quiet and reliable operation.
Technical Specifications :
- Frequency: 25-30MHz
- Power Supply: 110-230-240 Vac
- Input Power: 1-35W max (All modes)
- Output Power: 500W max
- Input VSWR: 1.1-1.5:1
- Fuse:
- Dimensions: L 415W 305 H 170 mm
- Weight: 13 Kg
Related products
The LA 250 V is a 200W 12V linear amplifier for use in the VHF 140 – 150 MHz, (2m), band, with an input power of 1 – 15 W. The LA 250 V has an illuminated LCD display where all the parameters of the apparatus are indicated. It also features protection for excessive antenna VSWR, excessive input power and over temperature. The V model features two 120mm cooling fans attached to the heatsink.
The KL 405 is a 180Wmax 12V linear amplifier for use on the 10m Amateur Band, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 405 features a six position output power selector via a front panel control and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.
The KL 506 is a 230Wmax 12V linear amplifier for use in the 10m Amateur Band frequency, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 506 features a 26dB RX preamplifier with electronic switching, a three position RF Output power selector via a control on the front panel, and a connector for remote control. On the front panel there is also a LED wattmeter to indicate the output power.
The KL 703 is a 12V linear amplifier for use in the 25 – 30 MHz frequency range, with a drive power of 1 to 35 W in all modes. The KL 703 has a three-position output power selector via a switch on the front panel, two heatsink cooling fans and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.