bandiera italiana
bandiera italiana
Sold Out
, , ,

The KL 505 is a 230Wmax 12V linear amplifier for use on the 10m Amateur Band, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 505 features a six position output power selector via a front panel control and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel.

 

Read more
Sold Out
, , ,

The KL 505 V is a 230Wmax 12V linear amplifier for use on the 10m Amateur Band, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes. The KL 505 V features a six position output power selector via a front panel control and a RX preamplifier with electronic switching, which can be activated via a switch on the front panel. The V version comes with two 80mm heatsink mounted fans.

 

Read more
Sold Out
, , ,

The KL 506 is a 230Wmax 12V linear amplifier for use in the 10m Amateur Band frequency, (or other HF bands with the use of a suitable Low Pass Filter). It requires a drive power of 1 to 10W in all modes.  The KL 506 features a 26dB RX preamplifier with electronic switching, a three position RF Output power selector via a control on the front panel, and a connector for remote control. On the front panel there is also a LED wattmeter to indicate the output power.

 

Read more
Sold Out
, , ,

The HLA 150 Black is a 150Wmax 12V linear amplifier for use on all HF bands from 1.8 to 30 MHz, with a drive power of 1 – 10 W. The HLA 150 Black features six Low Pass Filters , switched automatically by a microprocessor, or set manually using the front panel control. It also features an LED power meter, 3dB input attenuator and VOX or PTT input RTX control.

 

Read more
Sold Out
, , ,

The HLA 150 V Black is a 150Wmax 12V linear amplifier for use on all HF bands from 1.8 to 30 MHz, with a drive power of 1 – 10 W. The HLA 150 V Black features six Low Pass Filters , switched automatically by a microprocessor, or set manually using the front panel control. It also features an LED power meter, 3dB input attenuator and VOX or PTT input RTX control.  The V version comes with two 80mm fans attached to the heatsink.

Read more
Sold Out
, , ,

The HLA 300 V Black is a 280Wmax 12V linear amplifier for use on all HF bands from 1.8 to 30 MHz, with a drive power of 1 – 15W. The HLA 300 V Black features six Low Pass Filters , switched automatically by a microprocessor, or set manually using the front panel control. It also features an LED power meter, 3dB input attenuator and VOX or PTT input RTX control. It comes with 3 80mm cooling fans fitted to the heatsink.

Read more
Sold Out
, , ,

The HLA 305 V is a 12V linear amplifier for use on all HF bands from 1.5 to 30 MHz, with a drive power of 1 – 10 W.  The HLA 305 V is equipped with six Low Pass Filters , switched automatically by a microprocessor, or set manually using the front panel control. The HLA 305 V also has an illuminated LCD display and twin 120mm cooling fans mounted to the heatsink.

 

Read more
Sold Out
, , ,

The MLA 100 is a 100W 12V amplifier perfectly suited for QRP radios with a transmit power of 5W. With a drive power of 5W, the amplifier achieves an output power of 100W on the bands from 160 to 10m, and with 8W drive 80W output on 6m. The MLA100 features 7 Low Pass Filters automatically inserted or manually selected from the front panel. It also features PIN diode RTX switching for use even in QSK. The MLA100 is protected from excessive antenna VSWR, Excessive input power overdrive and has a thermal shutdown if overheated.

 

Read more
Sold Out
, , ,

The MLA 100 V is a 100W 12V  amplifier perfectly suited for QRP radios with a transmit power of 5W. With a drive power of 5W, the amplifier achieves an output power of 100W on the bands from 160 to 10m, and with 8W drive 80W output on 6m. The MLA100 features 7 Low Pass Filters automatically inserted or manually selected from the front panel. It also features PIN diode RTX switching for use even in QSK. The MLA100 is protected from excessive antenna VSWR, Excessive input power overdrive and has a thermal shutdown if overheated. The V version comes with a 80mm fan mounted to the heatsink.

Read more
Sold Out
, ,

LPS 107 is a reliable linear high quality fixed output voltage stabilized power supply, suitable for use with all electronic and telecommunication devices.

 

Supplied with 230V power cable.

Read more
Sold Out
, ,

LPS 107s is a reliable linear high quality power supply with variable output voltage, suitable for use with all electronic and telecommunication devices. It is equipped with two illuminated meters (Voltmeter and Ammeter) and a knob for adjusting the output voltage.

Comes with 230V power cable.

Read more
Sold Out
, ,

LPS 112 is a reliable linear high quality fixed output voltage stabilized power supply, suitable for use with all electronic and telecommunication devices.

Supplied with 230V power cable.

Read more

Showing 61–72 of 75 results